Amer Networks SS2GR50I Guía de instalación descargar pdf (Pagina 20)

Installation Guide

2-8

established; otherwise the link is not ready and should be examined.

Caution

Please verify the sign above the port to ensure using the other ports. Connecting to wrong

ports might damage the transceiver or the other ports. When connecting other devices

through a fiber cable to the switch, the output power of the fiber cable must not exceed the

maximum received power of the corresponding modules. Otherwise, it will damage the

switch. Do not stare at the fiber bore when the switch is in operation. That may hurt your

eyes.

2.3.5 Power Supply Connection

SS2GR50i/26i series uses110/220V AC power supply by default, and can fit a totally

range for the voltage’s small change. Please read the power input specification for the

detailed information.

1. Insert one end of the power cable provided in the accessory kit into the power source

socket (with overload and leakage protection), and the other end to the power socket in

the back panel of the switch.

2. Check the power status indicator in the front panel of the switch. The corresponding

power indicator should light. SS2GR50i/26i series is self-adjustable for the input voltage.

As soon as the input voltage is in the range printed on the switch surface, the switch can

operate correctly.

3. When the switch is powered on, it executes self-test procedure and startups.

Caution

The input voltage must be within the required range, otherwise the switch can be

damaged or malfunction. Do not open the switch shell without permission. It can cause

physical injury.

1 2 ... 15 16 17 18 19 20 21

Sin comentarios

Amer Networks SS2GR50I Guía de instalación Pagina 20